Silver bullion bar is initially converted into silver sheets. These sheets are cut according to required size and the basic outline sketch is made on it. Then the lack is spread evenly on the stone and it is lightly heated through fire gun and on that the silver sheet is stuck. The temperature of the lack is maintained till the process of silver sheet designing gets completed by heated it often. Then the detailed design is drawn on the silver sheet and by using designery chisels it is pressed on the silver sheet according to the design. By using this embossing method the design of the silver sheet is made and removed from the lack. Later when necessary as per the design the extra silver is cut off and all the parts of the same single product is joined by heating it. Once all the parts of the product is joined it is allowed to get cooled in temperature by immersing the product in the water for some time. And then once it is completely cooled it is taken out from water and sold in market.
Flow Chart: